Panasonic DMR-E60 - Manual (Page 67)

67
Troubleshooting guide (continued)
Sound
Displays
Play
No sound.
Low volume.
Distorted sound. ≥Check the connections. (pages 11 and 12)
≥Check the input mode on the amplifier if you have connected one. (pages 49, 50 and 57)
≥Turn V.S.S. OFF if it causes distortion. (page 41)
Cannot hear the desired audio
type.
Cannot switch audio during
stereo or NICAM broadcasts. ≥Press [AUDIO] (36) on the remote control to select the desired audio type. (page 17)
≥Go to Sound in the SETUP menus and choose the correct setting with “Bilingual Audio
Selection”. [DVD-R] (page 55)
≥If “D.MIX” does not appear in the display when playing multi-channel DVD-Audio, audio output
will be the front two speakers only. (page 5)
≥You cannot change the DVD-Audio audio type if the software producer has restricted play in
stereo.
≥It is not possible to switch the audio when the recording mode is XP and “LPCM” has been
selected in the SETUP menu, “Audio Mode for XP Recording”. (page 55)
≥You have used digital connection. Connect to other equipment using audio cables (analog
connection). (page 50)
≥You cannot change the audio type when using DVD-R.
The display is dim. ≥Go to Display in the SETUP menus and change the display’s brightness with “FL Display”.
(page 55)
“0:00” is flashing on the unit’s
display. ≥The clock is not set.
Go to Settings in the SETUP menus and set the clock with “Clock”. (page 58)
“NO READ” appears on the unit’s
display after using a lens cleaner. ≥Take the cleaner out of the unit.
Play fails to start even when [ 1]
(26) is pressed.
Play starts but then stops
immediately.
“NO READ”, “UNSUPPORT”, “NO
DISC” or “NO PLAY” appears on
the unit’s display.
≥Insert the disc correctly with the label facing up. (page 14)
≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Audio, DVD-Video, Video CD,
CD and MP3 disc. (page 8)
≥The disc is dirty. Clean it. (page 62)
≥The disc may be badly scratched. (page 62)
≥You inserted a blank DVD-RAM or DVD-R.
No response when buttons
pressed. ≥If “ ” appears on the television the operation is prohibited by the unit or disc.
≥If the unit is not operating at all, press [ , TIMER] (14) to switch the unit to standby, then press
[ , TIMER] (14) again to turn the unit on. The unit may not be operating correctly due to
lightning, static electricity, or some other external factor.
≥The Child Lock function is activated. (page 49)
A title or chapter doesn’t play
when it is selected. ≥Some titles and chapters on DVD-Video are not played when you have changed the ratings
level. (page 56)
Picture distorted during search. ≥Some distortion is normal.
Alternative soundtrack and
subtitles cannot be selected. ≥The languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.
Soundtrack/subtitle language is
different from the one selected
with the SETUP menus. ≥The language is not recorded on the disc. (page 54)
No subtitles. ≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. (page 40)
Angle cannot be changed. ≥This function depends on software availability. Angles can only be changed during scenes where
different angles are recorded (“ ” appears on the display).
You have forgotten your ratings
password. ≥Return the unit’s settings to the initial state (factory setting).
With the tray open, keep pressing [ :/6] and [5/9] (46) on the main unit
simultaneously for 5 or more seconds.