1 - configure remote site profiles for isdn ppp – Perle Systems IOLINK-520 User Manual

Page 47

Advertising
background image

Applications

IOLINK-520 & IOLINK-PRO Installation & Applications Guide — 2.27

2.3.1 - Configure Remote Site Profiles for ISDN PPP

If this IOLINK router is configured to have at least one ISDN switched circuit, the ISDN

call parameters must be defined so that the IOLINK router knows what ISDN phone

number to dial when a connection to this remote site is required and what security

parameters to use when establishing a connection.

When this IOLINK router receives an ISDN connection it will prompt the calling device

for a user name and password (PPP access security); once the name and password have been

authenticated, the user name is used to search the remote site profile entries to find a match.

Once a match is found, the configuration parameters defined within that remote site profile

are used to finish establishing the PPP connection. For example, if this IOLINK router

receives an ISDN call from another device and in response to the user name prompt

receives the name “Calgary”, it will look in the remote site list for a profile with the alias

“Calgary”. If the “Calgary” profile is found, the parameters in it will be used for password

authentication and completion of the connection. If there is no match for the user name

“Calgary”, the call will be rejected.

The remote site profile alias, user name of the security entry, and the user
name defined on the partner PPP router must all be the same for the
connection to be established.

Remote Site ISDN Phone Number

Location: Main

!

Configuration

!

Connections up

!

Remote Site Set-up

!

Edit Remote Site

!

Connection Set-up

!

ISDN Call Set-up

!

ISDN Number

The ISDN number defined here is the ISDN phone number of the

remote site ISDN PPP router. This is the ISDN phone number that will

be dialed to establish a connection to this remote site profile. A

connection to this remote site may be established by one of the

following methods:

1 a) Using the Manual Call option of the Remote Site set-up menu,

Location: Main

!

Configuration

!

Connections up

!

Remote Site Set-up

!

Manual Call

"

"

"

"

Advertising