Perle Systems IOLINK-520 - Manual (Page 53)

Applications
IOLINK-520 & IOLINK-PRO Installation & Applications Guide — 2.33
Now that the remote site profile is created, a link number must be assigned as the primary
link number. The primary link number is the link interface that the IOLINK router will use
to attempt to establish a connection to the remote site PPP router.
Primary Link Number
Location: Main
!
Configuration
!
Connections up
!
Remote Site Set-up
!
Edit Remote Site
!
Connection Set-up
!
Primary Link
The Primary Link number defined here is the link interface used to
establish the connection to the remote site PPP router. When a link
number is defined within a new remote site profile, that link number will
be removed from any remote site profile that originally was defined to
use the link. The link will then be used within the newly defined remote
site profile.
When this remote site profile is defined to use Multilink protocol, the
Secondary Connection should also be defined.
The Bridge settings may now be configured within the Bridge Parameters menu.
The IP settings may now be configured within the IP Parameters menu.
The IPX settings may now be configured within the IPX Parameters menu.
The Compression settings may now be configured within the CCP Parameters menu.
The configuration options described here are only for initial set-up and configuration
purposes. For more complete information on all of the configuration parameters
available please refer to the PPP Menu Reference Manual file on the accompanying CD-
ROM.
" " " "