Printek Mt2 Series - Manual (Page 31)

Specifications
Printer Specifications
Printing Specifications
Printing Method: Direct thermal
Printing Resolution: 384 dpi (8 dots per mm)
Printing Speed: 2″ (50 mm) per second maximum
Fonts/Graphics/Symbologies
Character Set: ASCII International and IBM graphic sets
Graphic Print: Bit addressable graphic command set;
Bar codes: 39,128, 2 of 5, and UPC.
Downloadable fonts, graphics, logos and additional bar codes
Characters Per Line: 24, 32, 38, 40, 42, 48 (s/w command)
Character Size: 3x2, 3x1.5, 3x1.15, 3x1 (H x W mm)
Print Contrast: Auto and user selectable
Communications
Standard Interfaces: RS232C and IrDA (standard)
Baud Rate: 2.4k. 9.6k, 19.2k, 38.4k baud
IrDA Transfer Speed: Fast – Up to 38.4k depending on computer capability
Standard – 9600 connect and transfer
Handshaking: CTS/RTS and/or XON/XOFF
Print Media
Paper Width: 2.25″ (57 mm) maximum
Roll Diameter: 1.5″ (36 mm) diameter roll, approx. 60′ (18.3 m) long
Power Management
Power: Removable rechargeable battery;
DC input power jack for wall mount adapter
Battery: 2 cell Lithium Ion, 2200mAH
Battery Recharge: Internal fast 180 min, fast charge with auto switch to trickle charge;
over voltage, over current and over heat protection
Paper Rolls Per Charge: ~6 (800 6″ receipts per charge)
Power Management: Via switch or on data detect; battery saving Auto OFF feature
25