Printek Mt2 Series - Manual (Page 32)

Specifications
Operator Controls and Indicators
Status Indicators: 3 LEDS (2 multi-functioning) – Power/Lo Bat., Charging, Fault/MCR Ready
User Switches: 2 switches – ON/OFF, Feed
Paper-out Detection: By photo interrupter
Physical Specifications
Size: 4.2” Width x 5.4” Length x 2.7” Depth (11 x 14 x 7 cm)
Weight: 16oz. (0.45 kg) with paper and battery pack
Environmental Specifications
Operating Temp: 14 to 122°F (-10 to 50°C)
Storage Temp: -4 to 140°F (-20 to 60°C)
Humidity: Up to 90% RH (non-condensing)
Drop Test: Meets industry standard
Agency Approvals: FCC Part 15 Subpart B, Class B; En55022 Class B;
EN50024; EN61000-3-2; EN61000-3-3; AS/NZS3548 Class B
Media Specifications
Specification Parameters
Thickness: 2.2 to 3.5 mils (receipt paper)
Width: 2.25 inches (57mm), 1 inch (25.4mm) with paper guide spacer installed.
Length: 1 roll of receipt paper is approx. 600 inches (15,240 mm)
Sensing: Black mark (on face of supply)
Roll Diameter: Outside: 1.5 inches (37.5 mm)
Inside: .56 inches (14 mm)
Maximum Print Area: 1.85 inches (72 mm) X 5.3 inches (203mm)
Approved Vendors: Kansaki: P300, P310, P350, P354, P530UV, TO281CA,
OP200, TO381N, F180, F380, F550
Jujo: TF-50KS-E2C
Honshu: FH65BV-3
26