Panasonic WV-CS564 - Manual (Page 26)

27
Patrol Learn with a Controller not Having the PATROL Key
1. Select the patrol learn in the setup menu, and then close it.
Starting points are stored and “LEARNING” appears on the moni-
tor screen.
2. Operate the patrol learn manually.
3. Open the SET UP menu to stop learning.
Notes:
• It is recommended that you set PAN LIMIT to ON for the
patrol learn. Otherwise PAN LIMIT is invalid for playback.
• Start the patrol learn function again from the starting point, If
the power has failed during the patrol learn mode.
• LEARN also stops 30 seconds after starting if the memory is
full.
• Auto refreshing may be activated during the patrol play mode
or the auto mode to calibrate the lens position.
Patrol Play with a Controller Having the PATROL Key
1. Press the PATROL PLAY key. The camera turns to the starting
point and the operations stored in the memory are reproduced.
Iris operation is only accepted during playback.
2. Press the PATROL STOP key and PROGRAM key simultaneously
to stop playback or press any manual operation key (e.g.,
PAN/TILT/ ZOOM/FOCUS) except the iris keys.
Patrol Play with a Controller not Having the PATROL Key
1. Select the patrol play in the setup menu, and then close it. The
camera turns to the starting point and the operations stored in the
memory are reproduced. Iris operation is only accepted during
playback.
2. Open the SET UP menu, or press any manual operation key (e.g.,
PAN/TILT/ ZOOM/FOCUS) except the iris keys to stop playback.
Patrol Play with the AUTO PAN Key
1. If the PATROL PLAY function is assigned to the AUTO PAN key,
press the AUTO PAN key to turn the camera back to the starting
point and to reproduce the operation data stored in the memory.
2. Press the PATROL STOP key and PROGRAM key simultaneously
or any manual operation key (e.g., PAN/TILT/ZOOM/FOCUS)
except the iris keys to stop playback.
Notes:
• During the patrol play mode, the camera movement may occa-
sionally deviate from the entered routine when the routine
includes a move to a preset position. If this happens, re-enter the
routine of manual operations in the patrol learn.
• During the patrol play mode, black and white automatic switching
does not work.
• During the patrol play mode, when the power of the controller is
turned on or off, the patrol play stops. In this case, press the
PATROL PLAY key again. (If SELF RETURN is set to ON, the
patrol play will start again after elapsing the setting return time.)
LEARNING
PATROL LEARN