Panasonic WV-CS564 - Manual (Page 5)

5
■ Camera Cleaning
Even if this function is used, noise may be produced on the monitor screen, or the preset position may be
deviated in the cause of prolonged use.
In such cases, set the refresh mode on the special menu. (See page 39.)
To use this camera with the WJ-SX550B Matrix Switcher, set the auto cleaning function on each unit side,
then clean WV-CS564 one time a day.
■ Preset Data Uploading or Downloading
To download the preset data from the camera to the controller or upload the downloaded data to the
camera, set the following functions to OFF.
Downloading or uploading the data may not work normally if these functions are set to ON.
• Cleaning (See page 28.)
• Auto mode (See page 23.)
• Self return (See page 22.)
Aim the camera at a motionless object such as a wall if possible to download or upload the preset data.
Note: Take notice of the following cases when uploading the downloaded data to the camera.
• Preset positions may vary. If a preset position varies, delete the preset position and set the cor-
rect preset position newly.
• If a preset data of WV-CS564 is uploaded to other models (e.g. WV-CS854 series), an error may
occur and uploading may not be completed successfully.
1. Do not attempt to disassemble the cam-
era.
To prevent electric shock, do not remove
screws or covers.
There are no user-serviceable parts inside.
Ask a qualified service personnel for servic-
ing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking,
shaking, etc. The camera could be dam-
aged by improper handling or storage.
3. Do not expose the camera to rain or mois-
ture, nor try to operate it in wet areas.
This product is designed for indoor use or
locations where it is protected from rain and
moisture. Moisture can damage the camera
and also cause electric shock.
If the camera becomes wet, turn the power
off immediately and ask a qualified service
personnel for servicing.
PRECAUTIONS