Panasonic WV-CS564 - Manual (Page 36)

37
● Electronic Zoom (EL-ZOOM)
The electronic zoom magnifies a scene 2-fold. With a 18-fold optical
zoom lens, the camera is capable of 36-fold zoom.
1. Move the cursor to EL-ZOOM and select ON or OFF by moving
the joystick to the right or left, and then press the CAM (SET) key.
The factory default setting is ON.
ON: Two (2) - fold electronic zoom is available with the ZOOM
switch on the controller.
OFF: The electronic zoom function is not used.
Notes:
• A scene magnified by the electronic zoom function may be
inferior to a non-magnified one in picture quality.
• The electronic zoom does not function in preset position set-
ting mode.
• To set preset position directly from the WV-CU360 System
Controller, it is temporarily required setting the electronic
zoom function to OFF.
● Image Hold (IMAGE HOLD)
The camera picture remains as a still image on the monitor screen
until the camera reaches the preset position. This function is useful for
surveillance via local area network.
1. Move the cursor to IMAGE HOLD and select ON or OFF.
The factory default setting is OFF.
ON: The last displayed still image is shown till the camera finishes
moving to a preset position. However, the still image may be
distorted with the effect of panning or tilting.
OFF: The current image is being displayed while the camera is
moving to a preset position.
** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SYNC
WHITE BAL
AF MODE
EL-ZOOM
IMAGE HOLD
RET SPECIAL
ON
ALC
OFF
ON(MID)
INT
ATW
MANUAL S
ON
OFF
Camera setting menu
** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SYNC
WHITE BAL
AF MODE
EL-ZOOM
IMAGE HOLD
RET SPECIAL
ON
ALC
OFF
ON(MID)
INT
ATW
MANUAL S
ON
OFF
Camera setting menu