Panduit PTR3E - Manual (Page 10)

GENERAL PRINTER SPECIFICATIONS
2
Section 1. Printer Overview
SPECIFICATION PTR3E
PRINT
Method Direct or Thermal Transfer
Speed (User Selectable) 2 to 10 ips
50 to 250 mm/s
Print Module (Dot Size) .0049 in.
.125 mm
Resolution 203 dpi
8 dpmm
Maximum Print Width 4.1 in.
104 mm
Maximum Print Length 49.2 in.
1249 mm
MEDIA
Minimum Width .87 in. (22 mm)
Minimum Length .63 in. (16 mm)
Maximum Width 5.0 in. (128 mm)
Type Die Cut Labels, Fan-Fold or Continuous
Maximum Caliper .010 in. (.25 mm)
Roll OD (max) 8.6 in. (218 mm), Face-Out Wind
Core ID (min) 1.5 in. (38 mm)
Core ID (Recommended) 3 in. (76 mm)
SENSING
See-Thru for labels Movable
Reflective Eye-Mark Movable
Continuous Form Sensor not used
RIBBON
Maximum Width 4.4 in. (111 mm)
Maximum Length 1475 ft. (450 m)
Thickness 4.5 micron, Ink-In Wind
All specifications subject to change without notice.