Nokia VT45K - Manual (Page 11)

E–9
Slot for Kensington
MicroSaver
Security System
NOTE: Built-in Security Slot ( )
This security slot supports the MicroSaver® Security System.
MicroSaver® is a registered trademark of Kensington Microware
Inc.The logo is trademarked and owned by Kensington Microware
Inc.
NOTE:When moving the projector or when it is not in use, cover
the lens with the lens cap.
Using the protective lens pad
To protect the Lens Shift mechanism, a hard polyurethane
protective lens pad is attached to the lens.
Before using the projector, remove the protective lens pad. After
use, reattach the protective lens pad.
NOTE: Before reattaching the protective lens pad, be sure to
use the shift lever to move the lens to the center position.
Bottom / Side Features
Lamp Cover Screw
Attaching the lens cap to the bottom with the sup-
plied string and rivet
1. Thread the string through the hole on the lens cap and then
tie a knot in the string.
Lens Cap
String
Rivet
Lamp Cover
2. Use the rivet to attach the string to the bottom.
Notch for zoom lever
Side view Front view