Nokia VT45K - Manual (Page 14)

E–12
Remote Control
VOLUME
RGB VIDEO S-VIDEO POWER
AUTO ADJ.
MAGNIFY
PICTURE FREEZE MUTE ASPECT
MENU
ENTER
HELP
CANCEL
RD-372E
1
3
4
5
7
8
11
14
6
9
10
15
12
13
2
Remote Control Features
1. Infrared Transmitter
Direct the remote control toward the remote sensor on the pro-
jector cabinet.
2. Power Button
If power is applied, you can use this button to turn your pro-
jector on and off.
NOTE: To turn off the projector, press and hold the POWER
button for a minimum of two seconds.
3. Source Buttons
Press to select a video source.
4. Auto Adjust Button
Use this button to adjust Position-H/V and Pixel Clock/Phase
for an optimal picture. Some signals may not be displayed
correctly, or in some cases it may take some time for a source
to switch between sources.
5. Magnify Buttons
Use the (+) or (–) button to adjust the image size up to 400%.
6. Volume Buttons
Press (+) to increase the volume and (–) to decrease it.
7. Picture Button
Press this button to display the Picture adjustment window.
Each time this button is pressed, the current picture adjust-
ment item will change as follows:
Brightness
→ Contrast → Color → Hue → Sharpness
Unavailable items will be skipped.
8. Freeze Button
This button will freeze a picture. Press again to resume mo-
tion.
9. Mute Button
This button turns off the image and sound for a short period of
time. Press again to restore the image and sound.
10. Aspect Button
Press this button to display the Aspect Ratio select window.
Each time this button is pressed, the current aspect ratio will
change as follows:
Normal
→ Zoom → Wide Zoom → Cinema → Normal → ...
You can also select the aspect ratio by using the Select or
button. If no adjustments are performed within 3 seconds, the
Aspect Ratio select window will disappear. (See also page E-
30.)
11. Menu Button
Displays the menu.
12. Help Button
Provides information about the current signal and the status of
the projector.
13. Select ( ) Buttons
: Use these buttons to select the menu of the item you
wish to adjust.
: Use these buttons to change the level of a selected
menu item.
14. Enter Button
Executes your menu selection and activates items selected from
the menu.
15. Cancel Button
Press this button to exit the menu. While you are in the adjust-
ment or setting menu, pressing this button will return to the
previous menu.
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time,
remove the batteries.