Important safeguards, Installation, Power supply – Nokia VT45K User Manual

Page 5: Cleaning

Advertising
background image

E–3

Important Safeguards

These safety instructions are to ensure the long life
of your projector and to prevent fire and shock. Please
read them carefully and heed all warnings.

Installation

1. For best results, use your projector in a darkened room.

2. Place the projector on a flat, level surface in a dry area

away from dust and moisture.

3. Do not place your projector in direct sunlight, near heat-

ers or heat radiating appliances.

4. Exposure to direct sunlight, smoke or steam can harm

internal components.

5. Handle your projector carefully. Dropping or jarring can

damage internal components.

6. Do not place heavy objects on top of the projector.

7. If you wish to have the projector installed on the ceiling:

a. Do not attempt to install the projector yourself.

b. The projector must be installed by qualified techni-

cians in order to ensure proper operation and reduce
the risk of bodily injury.

c. In addition, the ceiling must be strong enough to sup-

port the projector and the installation must be in ac-
cordance with any local building codes.

d. Please consult your dealer for more information.

Power Supply

1. The projector is designed to operate on a power supply

of 100-120 or 200-240 V 50/60 Hz AC. Ensure that your
power supply fits this requirement before attempting to
use your projector.

2. Handle the power cable carefully and avoid excessive

bending. A damaged cord can cause electric shock or
fire.

3. If the projector is not to be used for an extended period

of time, disconnect the plug from the power outlet.

Cleaning

1. Unplug the projector before cleaning.

2. Clean the cabinet periodically with a damp cloth. If

heavily soiled, use a mild detergent. Never use strong
detergents or solvents such as alcohol or thinner.

3. Use a blower or lens paper to clean the lens, and be

careful not to scratch or mar the lens.

CAUTION

Do not turn off the main power or unplug the power cable
from the wall outlet under any one of the following circum-
stances. Doing so can cause damage to the projector:

Immediately after the power cable is plugged into the wall
outlet (when the POWER indicator has not changed to a
steady orange glow).

Immediately after the cooling fan stops working (The cool-
ing fan continues to work for 60 seconds after the pro-
jector is turned off with the POWER button).

CAUTION

Avoid displaying stationary images for a prolonged period
of time.
Doing so can result in these images being temporarily sus-
tained on the surface of the LCD panel.
If this should happen, continue to use your projector. The
static background from previous images will disappear.

Advertising