NEC GT950 - Manual (Page 12)

E – 12
Terminal Panel Features
1. DVI-I Input Connector (DVI 29 pin)
This connector can be used to accept digital or analog signal output
from a computer with a DVI connector.
2. RGB Input Connector (Mini D-Sub 15 pin)
Connect your PC or other RGB equipment. Use the signal cable that's
supplied to connect to a PC.
3. RGB Output Connector (Mini D-Sub 15 pin)
You can use this connector to loop your computer image to an external
monitor from the RGB input source.
DVI digital signal will not be output. The last selected RGB analog
signal will be output while a Video or S-Video signal is viewed.
4. PC Control Port (Mini DIN 8 Pin)
Use this port to connect your PC to control your projector via a serial
cable. This enables you to use your PC and serial communication pro-
tocol to control the projector. The NEC optional serial cable is required
to use this port. Also PC Control Utility 1.0 included in the supplied CD-
ROM1 must be installed on your PC.
If you are writing your own program, typical PC control codes are on
page E-66.
A cap is put on the port at the factory. Remove the cap when using the
port.
5. Video Input Connector (RCA)
Connect a VCR, DVD player, laser disc player, or document camera
here to project video.
6. Mouse Output Port (Mini DIN 8 Pin)
Use this port to operate your computer's mouse functions from the
remote control.
7. S-Video Input Connector (DIN 4 pin)
Here is where you connect the S-Video input from an external source
like a VCR.
8. Remote Control Input Jack
Connect your remote control cable here for wired operation.
9. DVI Audio Input Mini Jack
This is where you connect audio output from your equipment connected
to DVI-I INPUT connector.
10. RGB Audio Input Mini Jack
This is where you connect RGB audio output from a computer or an-
other RGB source.
11. Audio Output Mini Jack
Connect additional external speakers here to listen to audio coming
from your computer, Video or S- Video input.
12. VIDEO Audio Input Jacks (RCA)
L/MONO
This is your left channel audio input for stereo sound coming from the
VIDEO source.
This also serves as your monaural audio input.
R
This is your right channel audio input for stereo sound from the VIDEO
source.
ZO
OM
USB
AUDIO IN
AUDIO IN
AUDIO OUT
AUDIO OUT
DVI-I IN
RGB IN
RGB OUT
PC CONTROL
MOUSE
OUTPUT
REMOTE
CONTROL
INPUT
AUDIO IN
AUDIO IN
R
L/MONO
VIDEO
S-VIDEO
10
11
12
13
14
15
16
9
1
2
3
4
8
6
5
7