Vpn tunnel control, Activating a vpn tunnel, Vpn tunnel control -25 – NETGEAR 54 Mbps Wireless ADSL Firewall DG834G User Manual
Page 119: Activating a vpn tunnel -25, Provides the step-by-step
Advertising
Wireless ADSL2+ Modem Router DG834G User Manual
Virtual Private Networking
6-25
v1.0, May 2008
VPN Tunnel Control
Activating a VPN Tunnel
There are three ways to activate a VPN tunnel:
•
Use the VPN Status screen.
•
Activate the VPN tunnel by pinging the remote endpoint.
•
Start using the VPN tunnel.
Using the VPN Status Page to Activate a VPN Tunnel
To use the VPN Status screen to activate a VPN tunnel:
1. Log in to the modem router.
2. On the main menu, select VPN Status. The VPN Status/Log screen displays:
Note: See
“Using Auto Policy to Configure VPN Tunnels” on page 6-32
about how to enable the IKE keepalive capability on an existing VPN tunnel.
Figure 6-29
Advertising