NETGEAR 54 Mbps Wireless ADSL Firewall DG834G User Manual
Page 135
Wireless ADSL2+ Modem Router DG834G User Manual
Virtual Private Networking
6-41
v1.0, May 2008
6. Repeat these steps for the DG834Gv5 on LAN B. Pay special attention to the following
network settings:
•
General, Remote Address Data (for example, 14.15.16.17)
•
Remote LAN, Start IP Address
–
IP Address (for example, 192.168.0.1)
–
Subnet Mask (for example, 255.255.255.0)
–
Pre-shared Key (for example, 12345678)
7. Use the VPN Status screen to activate the VPN tunnel:
a. From the main menu, select VPN Status to display the VPN Status/Log screen. Then click
VPN Status to display the Current VPN Tunnels (SAs) screen:
b. Click Connect for the VPN tunnel that you want to activate. Review the VPN Status/Log
screen (
) to verify that the tunnel is connected.
Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See
“Activating a VPN Tunnel” on page 6-25
for information about the other ways.
Figure 6-45