NETGEAR 54 Mbps Wireless ADSL Firewall DG834G - Manual (Page 170)

Wireless ADSL2+ Modem Router DG834G User Manual
B-20 NETGEAR VPN Configuration
v1.0, May 2008
a. Expand the Key Exchange subheading by double clicking its name or clicking the +
symbol. Then select Proposal 1 below Key Exchange.
b. In the SA Life drop-down list, select Unspecified.
c. In the Compression drop-down list, select None.
d. Select the Encapsulation Protocol (ESP) check box.
e. In the Encrypt Alg drop-down list, select the type of encryption. In this example, use
Triple DES.
f. In the Hash Alg drop-down list, select SHA-1.
g. In the Encapsulation drop-down list, select Tunnel.
h. Leave the Authentication Protocol (AH) check box cleared.
7. Save the VPN Client settings.
From the File menu at the top of the Security Policy Editor window, select Save.
After you have configured and saved the VPN client information, your PC automatically
opens the VPN connection when you attempt to access any IP addresses in the range of the
remote VPN router’s LAN.
Figure B-22