Step-by-step configuration – NETGEAR 54 Mbps Wireless ADSL Firewall DG834G User Manual
Page 152
Advertising
Wireless ADSL2+ Modem Router DG834G User Manual
B-2
NETGEAR VPN Configuration
v1.0, May 2008
Step-By-Step Configuration
1. Configure the DG834G v5 as in the gateway-to-gateway procedures using the VPN Wizard
“Setting Up a Gateway-to-Gateway VPN Configuration” on page 6-18
), being certain to
use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:
a. Enter toFVL328 for the connection name.
b. Enter 22.23.24.25 for the remote WAN’s IP address.
c.
Enter the following:
•
IP Address: 172.23.9.1
•
Subnet Mask: 255.255.255.0
Figure B-1
Note: Product updates are available on the NETGEAR website at
Unit
WAN IP
LAN IP
LAN Subnet Mask
DG834G
14.15.16.17
10.5.6.1
255.255.255.0
FVL328
22.13.24.25
172.23.9.1
255.255.255.0
Advertising