NETGEAR 54 Mbps Wireless ADSL Firewall DG834G User Manual
Page 162
Wireless ADSL2+ Modem Router DG834G User Manual
B-12
NETGEAR VPN Configuration
v1.0, May 2008
Setting Up the Client-to-Gateway VPN Configuration
(Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a
network gateway involves two steps:
•
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer’s
Main Office
.
•
configures the NETGEAR ProSafe VPN Client endpoint.
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the
VPN Router at the Employer’s Main Office
Follow this procedure to configure a client-to-gateway VPN tunnel by filling out the VPN Auto
Policy screen.
1. Log in to the VPN router at its LAN address of http://192.168.0.1 with its default user name of
admin, and password of password. Select VPN Policies to display the VPN Policies screen.
Click Add Auto Policy to proceed and enter the information.
Figure B-13