Opening the system – NCR S10 User Manual
Page 33
Advertising
Installing the System
Opening the System
NCR S10 Desktop Server User Guide
2-15
Opening the System
Read the “ESD Precautions” section earlier in this
chapter before proceeding.
To open the system, follow these steps:
1.
Turn off the system and unplug all cables.
2.
Place the system unit on a flat, steady surface.
3.
Hold the system by its side and turn it upright. Find
the two clips under the front panel.
4.
Press and remove the front panel by pushing the
two clips upward at a 45
°
°
angle to release the front
panel.
Caution
Advertising