NCR S10 - Manual (Page 59)

Using the BIOS Setup Utility
Basic System Configuration
NCR S10 Desktop Server User Guide 4-7
•
Second 00 to 59
To enter the configuration value for the first diskette
drive (drive A), highlight the Diskette Drive A
parameter. Press the left- or right-arrow key to view the
options and select the appropriate value.
The Diskette Drive A parameters have the following
options:
•
None
•
360 KB, 5.25-inch
•
1.2 MB, 5.25-inch
•
720 KB, 3.5-inch
•
1.44 MB, 3.5-inch
•
2.88 MB, 3.5-inch
Follow the same procedure to enter the value for the
Diskette Drive B parameter. Choose None if you do not
have a second diskette drive.
Move the highlight bar to the Fixed Disk 0 parameter to
configure the IDE fixed disk drive (drive C). Use the left
or right arrow key to display the IDE fixed disk options
with their respective values. Select an option that
corresponds to your IDE fixed disk type. Follow the
same procedure to enter the values for the IDE Fixed
Disk 1 parameter. Choose None if you do not have a
second fixed disk drive.
If you do not know the exact type of your IDE fixed
disk, select the option Auto. When you select this
option, the BIOS utility automatically determines the
Diskette Drives
IDE Fixed Disk Drives