NEC INTELLIGENT L2 SWITCH N8406-022A - Manual (Page 13)

Accessing the switch 13
SNMPv2 trap host configuration
The SNMPv2 trap host configuration is similar to the SNMPv1 trap host configuration. Wherever you specify the
model you need to specify snmpv2 instead of snmpv1.
c/sys/ssnmp/snmpv3/usm 10
name "v2trap"
/c/sys/ssnmp/snmpv3/access 10
name "v2trap"
model snmpv2
nview "iso"
/c/sys/ssnmp/snmpv3/group 10
model snmpv2
uname v2trap
gname v2trap
/c/sys/ssnmp/snmpv3/taddr 10
name v2trap
addr 47.81.25.66
taglist v2trap
pname v2param
/c/sys/ssnmp/snmpv3/tparam 10
name v2param
mpmodel snmpv2c
uname v2trap
model snmpv2
/c/sys/ssnmp/snmpv3/notify 10
name v2trap
tag v2trap
/c/sys/ssnmp/snmpv3/comm 10
index v2trap
name public
uname v2trap
SNMPv3 trap host configuration
To configure a user for SNMPv3 traps you can choose to send the traps with both privacy and authentication, with
authentication only, or without privacy or authentication.
This is configured in the access table using the command: /c/sys/ssnmp/snmpv3/access <x>/level, and
/c/sys/ssnmp/snmpv3/tparam <x>
. The user in the user table should be configured accordingly.
It is not necessary to configure the community table for SNMPv3 traps because the community string is not used by
SNMPv3.
The following example shows how to configure a SNMPv3 user v3trap with authentication only:
/c/sys/ssnmp/snmpv3/usm 11
name "v3trap"
auth md5
authpw v3trap
/c/sys/ssnmp/snmpv3/access 11
name "v3trap"
level authNoPriv
nview "iso"
/c/sys/ssnmp/snmpv3/group 11
uname v3trap
gname v3trap
/c/sys/ssnmp/snmpv3/taddr 11
name v3trap
addr 47.81.25.66
taglist v3trap
pname v3param
/c/sys/ssnmp/snmpv3/tparam 11
name v3param
uname v3trap
level authNoPriv
/c/sys/ssnmp/snmpv3/notify 11
name v3trap
tag v3trap
For more information on using SNMP, see the Command Reference Guide.