NEC INTELLIGENT L2 SWITCH N8406-022A - Manual (Page 16)

Accessing the switch 16
Configuring RADIUS on the switch (BBI example)
1. Configure RADIUS parameters.
a. Click the Configure context button.
b. Open the System folder, and select Radius.
c. Enter the IP address of the primary and secondary RADIUS servers, and enter the RADIUS secret for
each server. Enable the RADIUS server.
CAUTION: If you configure the RADIUS secret using any method other than a direct console connection, the
secret may be transmitted over the network as clear text.
d. Click Submit.
Open
Select