NEC INTELLIGENT L2 SWITCH N8406-022A - Manual (Page 34)

Ports and trunking 34
b. Select Trunk Groups.
c. Information about each configured trunk group is displayed. Make sure that trunk groups consist of the
expected ports and that each port is in the expected state.
Configurable Trunk Hash algorithm
This feature allows you to configure the particular parameters for the switch Trunk Hash algorithm instead of having
to utilize the defaults. You can configure new default behavior for Layer 2 traffic and Layer 3 traffic, using the CLI
menu cfg/l2/thash. You can select a minimum of one or a maximum of two parameters to create one of the
following configurations:
•
Source IP (SIP)
•
Destination IP (DIP)
•
Source MAC (SMAC)
•
Destination MAC (DMAC)
•
Source IP (SIP) + Destination IP (DIP)
•
Source MAC (SMAC) + Destination MAC (DMAC)
Open
Select