NETGEAR NMS100 - Manual (Page 29)

Reference Manual for the ProSafe Network Management System NMS100
Data and Statistics 3-9
September 2004 202-10058-01
The following table lists each available attribute in the Object Properties Attributes tab, the object
types it is valid for, and a description of the attribute.
Table 3-2. Object Properties Attribute tab
Object
Type a
a. D = Device, L = Link, N = Ring, Bus, Network, S = Subnet, G = Goto
Attribute Name Description
S, G, D Background Shape Icon background, one of Square, Circle, Hexagon, Octagon, or
Diamond.
S Bitmap Background bitmap image.
S Bitmap Scale Background bitmap image scaling factor (bigger number expands).
L Show Link Name Link names normally hidden.
D Exec Program Double-click program for devices. Include any of the following
special program arguments: $a – IP Address, $n –‘ node name, $g
– Read Community; $s – Set community, $w – console window
number.
D, L, N Poll Interval Seconds between poll sequences.
D, L, N Poll Timeout Seconds to wait for a response after a poll is sent.
D, L, N Poll Retries Number of times to retry a failed poll during a single poll sequence.
D, L, N Polling Agent IP Address of the Polling Agent system that performs regular and
trend statistics polling for this object. Unless you are using Remote
Polling Agents, this is set to localhost.
D, L, N TCP Services List of TCP service names to poll.
D, L, N Status Variable An SNMP variable with instance that is polled to determine device
status (as opposed to just polling for device response). For
example, ifOperStatus.3.
D, L, N Status Value The number to be compared to the returned Status Variable value.
D, L, N Status OK Expr The expression to use when comparing the Status Value to the
returned Status Variable to determine if the status is OK (<, >, <=,
>=, =, !=).
D, L, N HasRMON Set to TRUE to enable the RMON tool.
D, L,N MAC Address Primary device MAC address or link MAC address, if known.
D, L, N SNMP ObjectID Read-Only. The System Object Identifier of an SNMP object.