NETGEAR NMS100 - Manual (Page 46)

Reference Manual for the ProSafe Network Management System NMS100
4-10 Polling and Emailing
September 2004 202-10058-01
Other Event Types
The pollDeviceDown event is an example used in this section. The mechanism is the same for
other types of events, including those generated for Status Variable and Manual Threshold Alarms.
The following table shows common events and when they occur.
Table 4-2. ProSafe NMS Events
Event Subtree Trap Name Description
Snmpc-Status-Polling pollDeviceDown Device has not responded for three consecutive
poll sequences.
pollNoResponse Device failed to respond to one poll sequence.
pollRequestRejected Device rejected the sysObjectId.0 or the user-set
status polling variable.
pollResponse Device responded to a poll sequence.
pollServiceDown Could not connect to the TCP port after three
consecutive attempts.
pollServiceNoResponse Could not connect to the TCP port after one
attempt.
pollServiceResponding Connection to TCP port OK.
pollStatusTestFail Status variable test failed.
pollStatusTestPass Status variable test passed.
Snmpc-System-Info pollAgentConnect SNMPc polling agent connection to server
established.
pollAgentDisconnect SNMPc polling agent connection to server lost.
Snmpc-Threshold-Alarm alarmAutoThresholdExpand Trend auto-baseline moved higher.
alarmAutoThresholdReduce Trend auto-baseline moved lower.
alarmAutoThresholdSet Trend auto-baseline initially set.
alarmAutoThresholdTrigger Trend auto-baseline exceeded.
alarmManualThresholdTrigger Trend manual alarm passed threshold.
alarmManualThresholdReset After being triggered, a trend manual alarm no
longer passes the threshold test.
snmp-Traps authenticationFailure Trap generated by a device on an illegal access
(bad community name).
coldStart Trap generated by a device after it restarts.
linkDown Trap generated by a device when a link fails.
linkUp Trap generated by a device when a link that was
down recovers.