NETGEAR NMS100 - Manual (Page 32)

Reference Manual for the ProSafe Network Management System NMS100
3-12 Data and Statistics
September 2004 202-10058-01
Custom Menus
The Manage menus are actually built-in custom menus from an external configuration file. You
can also add custom menus to display particular tables. For example, if you have only a few device
types in your network you probably should add custom menus to display the vendor specific tables
for those devices. You can then display MIB information using the right-click menus instead of
searching for MIB tables in the MIB Selection Tree. For more information about custom menus,
select the Menu tab of the Selection Tool and press the F1 key.
Table Display Elements
The following figure shows a sample table display and describes the function of table controls.
Figure 3-3: Table display and table controls
• To start a graph display, first select one or more cells (rows, columns, or individual cells), then
use the Show Graph button.
• To change a table cell and do a Set Operation to the device, first locate settable cells (those
displayed in blue). Double-click the cell to move into Edit Mode. Enter the new value directly
into the cell (or select from the pull-down if it is displayed). Then click the Check Edit Control
button. To cancel a Set operation in progress, click the Cross Edit Control button.
Switch
Short
Pause
Edit
Poll
Save
Edit
Show
Controls
Polling Axis
Names
Interval
to File
Entry
Graph