NEC MobilePro 880 - Manual (Page 110)

Setting Up a Remote Connection 5-5
Follow these steps to create a new connection for your ISP
account.
1. Tap Start, Programs, Communication, then select Remote
Networking.
2. Double tap the Make a New Connection icon.
3. Enter a name for the new connection.
4. Select Dial-Up Connection as the connection type and tap
Next.
5. Use the dropdown box to select Internal Modem on COM
4 and tap Configure.
6. Select the required port settings and call options. Tap OK.
7. Tap TCP/IP Settings and configure the required General
Settings and Name Servers. Tap OK.
8. Tap Next and enter the required dial-up telephone
number. Tap Finish.
Once your ISP connection is established you can configure
your MobilePro for sending and receiving email through your
ISP. Follow the instructions in “Sending and Receiving
Email” and “Activating a Connection,” later in this chapter,
to send and receive email through your ISP.
For ISP settings, access:
http://www.cewindows.net/wce/isp.htm/. Although not an
official NECC web site, this site contains important
information about ISP settings.