NEC MobilePro 880 - Manual (Page 76)

4-2 Using the NEC MobilePro
Powering On and Off
Power on the NEC MobilePro as follows.
!
CAUTION
Do not attach a USB mouse to the MobilePro
system before powering on the system for the
first time. If the USB mouse is connected, it
prevents you from calibrating the touch screen.
!
CAUTION
If you power off, then quickly power on the NEC
MobilePro, your system may erroneously report
the presence of CompactFlash cards.
In addition, repeatedly powering off and quickly
powering on, may cause data loss. NECC
recommends that you wait ten seconds after
powering off, before powering on the NEC
MobilePro.
1. Slide the display panel latch to the right. Lift the display
panel up towards the rear of the unit.
!
CAUTION
Do not push the display panel beyond its pre-
designed stop point as you open the panel.