NEC MobilePro 880 User Manual
Page 97
Using the NEC MobilePro 4-23
Follow these steps to use the IR port to communicate with
another MobilePro or your host PC.
1.
Remove the PC Connect (serial) cable from the
MobilePro before attempting IrDA communication.
2.
Open the display panels on the two units that you want to
use for communication.
3.
Position the MobilePro units so that the IR ports face each
other. Position the units from 2 to 20 inches apart.
4.
Be sure that nothing obstructs the path between the IR
ports on both units, and that the ports are aligned
properly.
5.
Send your data by using the “Send To” selection in the
Windows CE Windows Explorer File menu.
6.
Highlight the file you want to transfer and choose
“Infrared Recipient” from the Send To selections.
Your file is transferred to the other device. The receiving
device uses the File/Receive command to receive the
infrared transmission.
Note:
If the units are too far apart or if
something blocks the path between the two
ports, data may not be sent or received correctly.