Modifying pc connection settings, Setting the infrared connection speed – NEC MobilePro 880 User Manual
Page 28
1-20 Getting Started
T
Enable the infrared port on your host PC.
T
Install Microsoft ActiveSync on your host PC.
T
Create a partnership between your host PC and your
MobilePro.
T
Verify that the desired synchronization services are
configured.
Modifying PC Connection Settings
Your MobilePro ships with PC Connection default
settings. Follow these steps to modify the PC connection
settings.
1.
Tap Start, Settings, Control Panel, Communications.
2.
Select the PC Connection tab.
3.
Select the Change tab, use the dropdown box to change
the setting to Infrared port, and click OK.
Proceed to the next section to set the infrared connection
speed, if necessary.
Setting the Infrared Connection Speed
Your NEC MobilePro supports both SIR (115 Kbps) and FIR
(4 Mbps) IR communications. Follow these steps to set the
infrared connection speed.
1.
Tap Start, Settings, Control Panel, and double tap
MobilePro Settings.
2.
Select the IrDA tab and select the appropriate infrared
connection speed. The infrared connection speed on your
NEC MobilePro must be compatible with the infrared
connection speed on your host PC.