NEC PAGEPRO 1100 - Manual (Page 110)

4-34
Using the PagePro 1100 Printer Driver Setup Dialog
Cha
p
ter
4
P
rin
te
r D
riv
er
Delete
Click this button to delete the watermark whose name is cur-
rently highlighted in the
Watermarks list. Note that the delete
operation is performed as soon as you click the Delete but-
ton, and that the delete operation cannot be undone.
Because of this, you should make sure you really no longer
need the highlighted watermark before clicking this button.
Watermark Name
Type in up to 72 characters for the name you want to assign
to the watermark whose current name is highlighted in the
Watermarks list.
String
Type in up to 72 characters for the content of the watermark.
Note that inputting a string that is too long to fit on the page
causes the ends of the string to be cut off.
Shading
Use this setting to set the relative darkness of the watermark
as 10% (lightest), 25%, 50%, 75% or 100% (darkest).
Style
Check one or both of the boxes to specify
Italic and/or Bold
for the watermark.
Font
Use these settings to specify the typeface and point size of
the watermark text.
Angle
Use these settings to specify the angle of the watermark on
the paper. Selecting
User Set undims the angle setting box,
which you can use to specify an angle value.
Position
Use these settings to specify the vertical and horizontal
positioning of the watermark on the paper. Selecting
User
Set undims the Horizontal and Vertical boxes, which you can
use to specify relative positions off of the vertical and hori-
zontal center points.