NEC PAGEPRO 1100 User Manual
Page 113
4-37
Cha
p
ter
4
P
rin
te
r D
riv
er
Using the PagePro 1100 Printer Driver Setup Dialog
Medium:
This is the default setting, which should be good enough for
most printing needs. Change to another setting only if text and graphics
appear to be too dark or too light when Medium is selected.
Dark:
Use this setting to make the edges of line art and text smoother
by using more dots.
Toner Density
Use this box to make fine adjustments in the density of the toner during
printing. Use this setting to adjust toner density to the level you want.
All Raster
Use this setting to turn
All Raster
on and off. When turned on, all
objects (fonts, vector graphics, raster graphics) are sent to the printer as
raster (bitmapped) data. This can cause printing to take longer than
normal.
Important!
Resolution
This setting specifies the number of dots per inch (dpi).
300
×
300 dpi:
Use this setting for normal resolution printing.
600
×
600 dpi:
Use this setting for high-resolution printing.
1200
×
600 dpi:
Use this setting for 1200dpi horizontal resolution
printing.
Font
Checking
Use Printer TrueType Font
option substitutes printer-resi-
dent TrueType fonts for TrueType fonts in the print document, which is
faster than downloading fonts from the computer. Uncheck this option
if you want your printout to match exactly what is on the computer
screen.
◆
N-up
,
Fit to Paper
,
Scaling
, and
Use Printer True Type Font
are dis-
abled while the
All Raster
option is turned on.