NEC EXPRESS800 - Manual (Page 23)

Planning Your Site 2-7
System Rack Placement
The system rack comes equipped with a front stabilizer that:
! steadies the rack when you extend equipment for servicing, and
! prevents creeping due to vibration.
The stabilizer is predrilled to allow you to secure the system rack to the floor.
Note: If preparing the area prior to the arrival of the
system, review the power cable restrictions given in
“Electrical Facilities” before setting any stabilizer anchors.
Figure 2-2 gives the distance between anchoring holes when the stabilizer is
attached to the system rack.
17"
22"