Nortel Networks 5500 series User Manual

Page 315

Advertising
background image

Managing private keys and certificates

315

2

Access the Certificate menu by using the

/cfg/cert <cert

id>

command, where

<cert id>

is the certificate number.

To install a new certificate, specify an unused certificate number.
To replace an installed certificate, specify the installed certificate
index number.

To view basic information about all configured certificates,
use the

/info/certs

command. To verify that the current

certificate number is not in use by an installed certificate, use the

/cfg/cert #/show

command.

3

Import the certificate. Enter the following command:

/cfg/cert #/import

You are prompted to enter the certificate and private key import
information. If the private key has been password protected, you
are prompted for the correct password phrase as well.

Table 55

"Certificate and key import information" (page 315)

explains the

required parameters.

Table 55
Certificate and key import information

Parameter

Description

Protocol

The file import protocol. The options are TFTP,
FTP, SCP, SFTP. The default is TFTP.

Server host name
or IP address

The host name or IP address of the file
exchange server.

File name

The name of the file on the file exchange
server.

[FTP user name
and password]

For FTP, SCP, and SFTP, the user name and
password to access the file exchange server.
The default is

anonymous

.

For anonymous mode, the Nortel SNAS uses
the following string as the password (for logging
purposes):

admin@<hostname>.isd

.

[Pass phrase]

If the key is password protected, the password
phrase specified when the key was created or
exported. The password phrase must be at
least four characters in length.

4

If the private key was not included in the certificate file, repeat

step 3

to import the key file, then go to

step 5

.

5

Apply the changes.

The certificate and private key are now fully installed.

Figure 18 "Adding a certificate and private key by importing"
(page 316)

shows sample output for the

/cfg/cert #/import

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Copyright © 2007, 2008 Nortel Networks

.

Advertising
This manual is related to the following products: