Nortel Networks 5500 series User Manual
Page 47
Initial setup
47
For communication between the Nortel SNAS and the network
access devices, generate the SSH key after you have completed
the initial setup (see
16
Change the admin user password, if desired.
Enter a password for the "admin" user:
Re-enter to confirm:
Make sure you remember the password you define for the admin
user. You will need to provide the correct admin user password
when logging in to the Nortel SNAS (or the Nortel SNAS cluster)
for configuration purposes.
17
Run the Nortel SNAS quick setup wizard. This creates all the
settings required to enable a fully functional portal, which you
can customize later (see
“Configuring the domain” (page 79)
).
For information about the default settings created by the wizard,
see
“Settings created by the quick setup wizard” (page 49)
.
18
Start the quick setup wizard.
Run NSNAS quick setup wizard [yes]: yes
Creating default networks under /cfg/doamin #/aaa/
network
19
Specify the portal virtual IP address (pvip) of the Nortel SNAS
device.
Enter NSNAS Portal Virtual IP address(pvip): <IPaddr>
20
Specify a name for the Nortel SNAS domain.
Enter NSNAS Domain name: <name>
21
Specify any domain names you wish to add to the DNS search
list, as a convenience to clients. If the domain name is in the
DNS search list, clients can use a shortened form of the domain
name in the address fields on the Nortel SNAS portal.
Enter comma separated DNS search list
(eg company.com,intranet.company.com):
For example, if you entered
company.com
in the DNS search
list, users can type
nsnas
to connect to
nsnas.company.com
from the portal page.
22
If you want to enable HTTP to HTTPS redirection, create a
redirect server.
Create http to https redirect server [yes]:
23
Specify the action to be performed when an SRS rule check fails.
The options are:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100
03.01
Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.