Table 77 "system control process messages—alarm – Nortel Networks 5500 series User Manual

Page 455

Advertising
background image

Syslog messages by message type

455

Table 77
System Control Process messages—ALARM

Message

Category

Explanation/Action

Name: isd_down
Sender: <IP>
Cause: down
Extra:
Severity: critical

ALARM

A member of the Nortel SNAS cluster
is down. This alarm is only sent if the
cluster contains more than one Nortel
SNAS.

Name: single_master
Sender: system
Cause: down
Extra:
Severity: warning

ALARM

Only one master Nortel SNAS in the
cluster is up and running.

Name: log_open_failed
Sender: <IP>, event
Cause and Extra are explanations of
the fault.
Severity: major

ALARM

The event log (where all events
and alarms are stored) could not be
opened.

Name: make_software_release_perm
anent_failed
Sender: <IP>
Cause: file_error | not_installed
Extra: "Detailed info"
Severity: critical

ALARM

Failed to make a new software
release permanent after being
activated. The system automatically
reverts to the previous version.

Name: copy_software_release_failed
Sender: <IP>
Cause: copy_failed | bad_release
_package | no_release_package |
unpack_failed
Extra: "Detailed info"
Severity: critical

ALARM

A Nortel SNAS failed to install a
software release while trying to install
the same version as all other Nortel
SNAS devices in the cluster. The
failing Nortel SNAS tries to catch
up with the other cluster members,
because it was not up and running
when the new software version was
installed.

Name: license
Sender: license_server
Cause: license_not_loaded
Extra: "All iSDs do not have the same
license loaded"
Severity: warning

ALARM

All Nortel SNAS devices in the cluster
do not have a license containing
the same set of licensed features.
Check loaded licenses using the

/cfg/sys/cur

command.

Name: license
Sender: <IP>
Cause: license_expire_soon
Extra: "Expires: <TIME>"
Severity: warning

ALARM

The (demo) license loaded to the
local Nortel SNAS expires within 7
days. Check loaded licenses using
the /cfg/sys/cur command.

Nortel Secure Network Access Switch

Using the Command Line Interface

NN47230-100

03.01

Standard

28 July 2008

Copyright © 2007, 2008 Nortel Networks

.

Advertising
This manual is related to the following products: