Show or set system configuration, Cli commands, continued – N-Tron 708M12 User Manual

Page 138

Advertising
background image

(Revised 2011-07-20)

Page 138 of 156

CLI Commands, Continued…

Show or Set System Configuration

Command Name

System

Description

Show or set System configuration. If no parameters are specified, this command will
show the System configuration (same as -show parameter).

Syntax

system [-show] [-name label] [-browser state]

Parameters

-show

Show configuration.

-name label

Set the switch name.

-browser state

Set the browser access status to e(nabled) or d(isabled).

Examples

N-TRON/Admin> system -name "Private Switch" -browser disabled

IP Configuration : Static
Client ID (hex) : 0007affbe400
IP Address : 192.168.2.214
Subnet Mask : 255.255.255.0
Gateway : 192.168.1.9
MAC Address : 00:07:af:fb:e4:00
System Up Time : 0 days, 0 hours, 17 mins, 2 secs
Name : Private Switch
Contact : N-TRON Admin
Location : Mobile, AL 36609
Browser Access : Disabled


Changes have been made that have not been saved.

N-TRON/Admin>

NOTES

A switch name may only contain alphanumeric, space, ‗:‘, ‗-‗, ‗_‘, and ‗#‘ characters, and
may not begin with a number, space, or underscore. A name with embedded space
characters must be enclosed in quotes.

Advertising