N-Tron 708M12 - Manual (Page 31)

(Revised 2011-07-20) Page 31 of 156
Administration – Fault
The Fault tab under the Administration category provides configurable selections indicating the way to
notify when a Power or N-Link, or Port Usage, or N-Ring Signal fault occurs. The notification may consist
of any combination of the options: Show web, Show LED, and Contact. Power faults consist of V
1
and V
2.
Port Usage faults are based on the settings of Usage Alarm Low [%] and Usage Alarm High [%] thresholds
from the Ports Configuration Page. N-Ring signal faults consist of: Broken, Partial Break (Low), Partial
Break (High), and Multiple Managers.