Eizo RADIFORCE RX211 - Manual (Page 13)

1. Introduction
11
1-. Controls and Connectors
Front
(1) Mode Switch Displays the CAL Switch menu (p. 27).
(2) Input Signal Selection
Switch Switches input signals for display when two PCs are connected to
the monitor.
(3) Enter Switch Displays the Adjustment menu, determines an item on the menu
screen, and saves values adjusted.
(4) Directing Switches * 1
(Left, Down, Up, Right)
Chooses an adjustment item or increases/decreases adjusted
values for advanced adjustments using the Adjustment menu
(p. 21).
(5) Power Switch Turns the power on or off.
(6) Power indicator * 2 Indicates monitor’s operation status.
Green:
Orange:
Flashing orange slowly:
Off:
Operational
Power saving
Power off (Main power is on)
Main Power off
*1 When the monitor is oriented in the landscape position, these switches can be changed to Up, Left, Right,
and Down.
*2 To disable the power indicator while the monitor is operational, see p. 26. For power indicator status when
using the “Off Timer,” see p.26.
ScreenManager ®
main menu
CAL Switch menu
Control Panel
English