Eizo RADIFORCE RX211 - Manual (Page 18)

1
2. Cable Connection and Screen Adjustment
7
Turn on the PC’s power.
The image will appear.
If an image does not appear, refer to “7. Troubleshooting” (p. 36) for additional
advice.
Refer to “2-4. Screen Adjustment (In case of Analog Input Signal)” (p. 18) and
adjust the screen for analog input.
If using the monitor in the digital input signal, it displays the image correctly based
on its pre-setting data.
When finished, turn off the PC and the monitor.
Tips
•Adjust the brightness of the screen depending on the brightness of your
environment.
•Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
8
When using the software “RadiCS LE” (for Windows) or
“ScreenManager Pro for Medical” (for Windows) connect the monitor
to a USB compliant Windows computer (or other USB hub) with a
USB cable.
Refer to “5. Making Use of USB (Universal Serial Bus)” (p. 33).