Eizo RADIFORCE RX211 - Manual (Page 30)


3. Adjustment and Settings
-. Adjustment Lock Function
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked functions • Display, adjustment, and setting of the ScreenManager
• Brightness adjustments to the CAL Switch mode
Unlocked function • Selection of the CAL Switch mode with the mode switch
• Input Signal Selection Switch
[How to lock]
1. Turn off the monitor power by touching the power switch.
2. Touch the power switch while touching the enter switch.
[How to unlock]
1. Turn off the monitor power by touching the power switch.
2. Touch the power switch while touching the enter switch, and then turn on the monitor
again. The adjustment lock is released.
NOTE
• The adjustment lock function may activate when calibration is performed with the
calibration kit (RadiCS LE / see Optional, p. 42). The monitor can be unlocked using the
same unlocking procedure described above.