Nikon 990 - Manual (Page 23)

iPIX® Photography with Nikon Digital Cameras 18
3 - PREPARING FOR PHOTOGRAPHY
Assembling Your iPIX Camera Equipment
Step 3: Attach the Camera to the Rotator
1. Place the camera on the rotator.
2. Align the threaded mount on the bottom of the camera with the
thumb screw on the rotator.
3. The camera body will sit differently on the rotator depending upon
your camera model. The front of the camera lens should sit directly
over the rotator’s center.
4. Gently turn the thumb screw on the rotator clockwise to secure the
camera. Do not over tighten.
5. Turn the rotator until it clicks softly into place.
6. Rotate the camera clockwise by gripping the rotator base until it clicks
into place.
To avoid image misalignment or camera/lens damage, rotate the camera
clockwise using the rotator base only. Whenever you rotate the camera,
make sure the rotator remains securely attached to the tripod.
Thumb screw
The rotator cradles and supports the camera body. The camera
should have very little movement once it is securely fastened to
the rotator.