NEC IP3AT-8WV(AUSTRALIA) - Manual (Page 33)

17
4.
F
EATURES
This section explains how to use the features on
your phone.
• TO USE CONFERENCE
(3-WAY CALL)
You can establish a Conference call (3-way call).
- During an active call, press the key to
hold the line.
- After hearing Second Dial Tone, enter the
phone number that you want to join the call.
- When the called party answers the call,
press the key. Your phone displays as
follows.
This operation is different
depending on your system. Please
contact your network
administrator.
• TO USE SPEAKERPHONE
During an active call, you can use Speakerphone.
When entering Speakerphone mode, you can
hear the called party’s voice from the speaker of
your phone.
- Press and hold the key for 2 seconds
or more to enter Speakerphone mode.
- Press and hold the key again for 2
seconds or more to exit Speakerphone
mode.
Note: To use Speakerphone, you need to
enable this feature. See “8.SETTINGS”
for more information.
• TO ADJUST CALL VOLUME
You can increase or decrease the receiver
volume in Standby mode or during a call. The
volume can be set in 3 steps (From Level 1
[Soft] to Level 3 [Loud]). The factory default
value is Level 2 [Medium].
During a call:
Press the key to select an appropriate
volume and then press the “OK” soft key or wait
timeout while talking with your phone.
In Standby mode:
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “2.Talk” and
then press the key.
- Press the key to select “3.Call Volume”
and then press the key.
- Press the key to select an appropriate
volume and then press the “OK” soft key.
You can reach the Call Volume
menu by pressing the following
keys.
To go to the Call Volume menu:
TIP
00:00:35
CONF 240
Call Volume
Large
OK Back
TIP