NEC IP3AT-8WV(AUSTRALIA) - Manual (Page 55)

39
• PRIVATE CALL
Factory Default: Allow Incoming
Your can block incoming calls without Caller
ID.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “5.Private Call”
and then press the key.
- Press the key to select “1.Allow
Incoming” or “2.Block Incoming” and then
press the “OK” soft key.
You can reach the Private Call
menu by pressing the following
keys.
To go to the Private Call menu:
• VIBRATION SETTING
Factory Default: Pattern1 (All kind)
You can select a vibration setting pattern on a
call kind basis (External Ring, Internal Ring, IM
and Non-notification).
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “6.Vibrator” and
then press the key.
- Press the key to select a call kind you
want to change the vibration setting for and
then press the
_ key.
-
Press the key to select the vibration
setting you want and then press the “OK”
key.
By pressing the “Conf” or “Stop”
soft key, you can sample the
Vibration setting while you select a
Vibration setting.
You can reach the Vibration
setting menu by pressing the
following keys.
To go to the Vibrator menu:
Private Call
1.Allow Incoming
2.Block Incoming
OK Back
TIP
Vibrator
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
Vibrator
Conf OK Back
1.Disable
2.Pattern1
3.Pattern2
TIP
TIP