NEC IP3AT-8WV(AUSTRALIA) - Manual (Page 63)

47
• DISPLAY PATTERN
Factory Default: Normal
Your phone can display reversed LCD pattern.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “3.Display” and
then press the key.
- Press the key to select “6.Display
Pattern” and then press the key.
- Press the key to select “1.Normal” or
“2.Reversing” and then press the “OK” soft
key.
You can reach the Display Pattern
menu by pressing the following
keys.
To go to the Display Pattern menu:
• CHANGE PASSWORD
Factory Default: -
You can change the password that is used for
Password Lock.
Please contact your network
administrator to receive your
password.
Use 4 numeric characters for a
password.
-
Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “4.Change
Password” and then press the key.
- Enter your current password and then press
the “OK” soft key.
-
Enter the new password you want and then
press the “OK” soft key.
You can reach the Change
Password menu by pressing the
following keys.
To go to the Change Password
menu:
TIP
Disp Pattern
1.Normal
2.Reversing
OK Back
TIP
Change Pass.
12 OK Clear
Old Password:
****
TIP
TIP
Change Pass.
12 OK Clear
New Password:
1234