Linking to more than one sensor – Nike + SPORTBAND User Manual
Page 20
20
The Nike+ SportBand User’s Guide
Linking to More Than One Sensor
Your SportBand comes already linked to a sensor, but you can link it with up to
8 sensors. This is a great option to have if you workout in more than one pair of
shoes.
Press and hold the Toggle button (on the side) for 10 seconds (fig.35) and walk
around to activate the sensor (fig.36). If only one active sensor is present, a blinking
LINK message will appear. The linking is complete once the OK message has
appeared for 5 seconds.
The SportBand can only link to one new shoe sensor at a time. If it detects too many
unlinked sensors, the display will show WALK AWAY (fig.37).
Walk away from where you are to allow the SportBand to establish the link to the
sensor in the shoes you are wearing. When only that sensor is detected the LINK
message will appear, followed by OK.
Important: You can only link up to a total of eight different sensors. If you link to a
9th sensor, the link to the 1st sensor will be deleted.
10 sec
fig.35
fig.36
fig.37