Nike + SPORTBAND - Manual (Page 22)

22
The Nike+ SportBand User’s Guide
About the Memory
The sportband stores up to 28 hours of run info.
( Approximately 1 month of running 1 hour a day.)
If you aren’t recording a run, the MEM LOW message will appear on the display
when there is approximately 1 hour of recording time left. You can still go for a run,
but the memory will only record approximately 1 hour’s worth of run info.
If you press and hold the Record button (on top) to start a run, and the memory has
reached its full capacity, the MEM FULL message will blink twice before exiting to
the time of day. You cannot record a run when the memory is full.
If the memory reaches its full capacity while you’re recording a run, the SportBand
will continue recording but will only save the last measurement taken when you end
your run. In the nikeplus.com site you will see a flat line for this period but you will
be able to record the total distance of your run.
To free-up the memory, connect your SportBand Link to the USB port of a computer
installed with the Nike+ Utility. All of your recorded runs will be uploaded to nikeplus.
com, and the memory will be freed to record more runs.