Nike + SPORTBAND - Manual (Page 5)

5
The Nike+ SportBand User’s Guide
Quick Start
Congratulations on purchasing your
Nike+ SportBand. Read this section
to get started using the Nike+
SportBand quickly.
Step 1: Download and install
the Nike+ Utility.
Important: Do not connect the Nike+
SportBand Link to the USB port of your
computer until you’ve downloaded and
installed the Nike+ Utility. (fig.1)
1. Go to nikeplus.com/downloads
2. Download the Nike+ Utility Installer.
3. Launch the Nike+ Utility Installer,
and follow the instructions.
Step 2: Connect the Link and
customize the settings. (fig.2)
1. To charge the battery, simply connect
the Nike+ SportBand Link to a USB port
on your computer. For best results, let it
charge for about 2 hours or until the
battery icon shows that the battery is fully
charged.
2. The Nike+ Utility software will open
automatically when you plug in the
SportBand Link.
3. Click the “i” button (fig.3) in the lower
right-hand corner of the main window
to customize your user settings like
weight (for tracking calories burned)
and units of distance (in miles or
kilometers).
4. Place the SportBand Link back into
the SportBand.
fig.1
fig.2
fig.3
nikeplus.com/downloads
All 8 runs have been uploaded
VISIT NIKEPLUS.COM
Nike+ Sportband
i
All 8 runs have been uploaded
VISIT NIKEPLUS.COM
Nike+ Sportband
i