Taking a quick tour, Introducing the software – NEC MobilePro 790 User Manual
Page 17
1-10 Getting Started
Note
Before using the system for the first time, allow ten hours for both
the main and the backup batteries to fully charge, even if the indicator on
the front of the MobilePro lights green before the full ten hours are passed.
Taking a Quick Tour
This section takes you through the process of setting up your system for
the first time.
1.
Open the display panel to start your NEC MobilePro 790 for the first
time. Press the Power button if the system does not start
automatically.
2.
Follow the on-screen instructions to calibrate the touch screen. Press
Ctrl Alt =
to recalibrate at any time.
3.
Enter your name, local city, and set the clock for your local time.
4.
Be sure to specify a country for modem use. For details, see the
section in Chapter 4, “Adjusting MobilePro Settings.”
Introducing the Software
Your NEC MobilePro 790 features the latest version of Microsoft
Windows Handheld PC 2000 software along with an additional
application on the accompanying CD.
Your NEC MobilePro 790 software includes:
!
Microsoft ActiveSync CD (Install on your host PC for access and
synchronization.)
!
Microsoft Windows CE operating system pre-loaded (in ROM)
applications.
For more information about your MobilePro software, refer to Chapter 3,
“Introducing Windows CE.”