NEC MobilePro 790 - Manual (Page 59)

Using the NEC MobilePro 4-3
If the MobilePro is not used for a specified length of time, it automatically
shuts off. You can select how long the unit remains on when running on
battery power alone through the Power selection in the Windows CE
Control Panel. On the Windows CE desktop, tap Start, Settings, Control
Panel. Double tap the Power icon and select the Power Off tab to
designate a power off time.
Note
As a general operation rule, frequently back up and synchronize
data between your MobilePro and your host PC.
Synchronization occurs each time you connect your MobilePro to your
host PC, once initial synchronization is configured. For details, see the
section in Chapter 1, “Connecting to Your PC.”
For details about backing up and restoring data, see the section in
Chapter 3, “Backing Up and Restoring Data.”
Making Display Panel Adjustments
You can adjust the brightness of the display panel in the NEC MobilePro
using two function keys located at the top right of the keyboard.
Increasing panel brightness can dramatically lower battery life.
Follow these steps to adjust the display panel brightness.
1. Open the display panel and power on the unit.
2. Press the brightness up or brightness down keys as required.
Adjusting the brightness
A – Brightness up B – Brightness down